What SS-31 is
Published chemistry, not a measurement from any lot.
SS-31 is a synthetic tetrapeptide amide, D-Arg-Dmt-Lys-Phe-NH2, and it goes by at least three other names in the literature and in regulatory filings: elamipretide, MTP-131 and Bendavia. Four residues is short, but almost nothing about this molecule is standard. The arginine is the D enantiomer, residue two is 2′,6′-dimethyltyrosine, a non-proteinogenic amino acid, and the C-terminus is an amide rather than a free acid.
The pattern is deliberate: aromatic and cationic residues alternate, which is what gives the molecule its physical character. Unlike most of the catalog, it is not a fragment of any natural protein, so there is no parent sequence to compare it against and no natural analogue to confuse it with. Everything distinctive about it is synthetic design, which is also why it is harder to make correctly than a four-residue peptide sounds.
- Arg1
- Dmt2
- Lys3
- Phe4
- NH2
- CAS
- 736992-21-5
- Molecular formula
- C32H49N9O5
- Molecular weight
- 639.8 g/mol
- Sequence
- D-Arg-Dmt-Lys-Phe-NH2
- Residues
- 4
- Also searched as
- SS31, elamipretide, MTP-131, Bendavia
Compiled from public chemistry records (PubChem, FDA GSRS, UniProt). Values marked “awaiting confirmation” are not yet confirmed by Marogen. The certificate for a lot is the authority for every number on it. See the analytical reference table.
Formats Marogen stocks
Every SS-31 listing in the catalog, with sizes and SKUs.
Marogen lists SS-31 in two formats. The lyophilized vial is a single strength and is the format for analytical work, because the solid can be weighed and made up to a concentration the method sets. There is no SS-31 pen and no SS-31 blend.
The 15 mL metered nasal spray is the same peptide in solution, at the lowest spray strength in the range, with the metered output per actuation published as a device specification. As with every spray, the fill is the supplier's rather than one the lab sets, so if a project needs a known concentration the vial is the format to buy.
| Listing | Form | Sizes | SKU | Documentation |
|---|---|---|---|---|
| SS-31 | Lyophilized powder, sealed vial | 10 mg | SS31 | Lot SS31-10-0803 on file |
| SS-31 Nasal Spray | 15 mL metered nasal spray | 15 mg / 15 mL | SNS-SS31-15 | Not yet published |
2 catalog listings are covered here. Sizes, SKUs and documentation status are read from the catalog at build time. Blends contain more than one molecule, so only single-component listings behave as a single-analyte standard. Pricing is per account: see wholesale pricing.
What a certificate of analysis must show
Two of the four residues need explicit confirmation.
A mass spectrum cannot distinguish D-arginine from L-arginine, because enantiomers have identical masses. That is the central problem with an SS-31 certificate: identity by mass confirms the formula, not the stereochemistry, and the D-residue is part of what the molecule is. A certificate that wants to prove it has SS-31 rather than an all-L analogue needs chiral analysis, or at minimum a statement of the synthetic route and the amino acid used.
The dimethyltyrosine residue is the second field to check, because it is the residue a supplier is most likely to substitute with plain tyrosine. That substitution costs 28 Da and is visible by mass, so it is the easier of the two to catch. Marogen publishes released certificates by lot number at marogenbio.com/coa, with a lookup at marogenbio.com/lot. No SS-31 lot has a published certificate today, so request one with the quote.
| Field | What it has to say for SS-31 |
|---|---|
| Lot number | As printed on the vial or bottle, matching the label exactly |
| Identity | Observed against calculated mass: near m/z 640.8 for [M+H]+ or 320.9 for [M+2H]2+, from 639.8 g/mol free base |
| Stereochemistry | That residue one is D-arginine. Mass cannot show this, so chiral analysis or a stated synthetic route is what carries it |
| Dmt residue | That residue two is 2′,6′-dimethyltyrosine, not tyrosine. Substituting plain tyrosine costs 28 Da and is visible by mass |
| C-terminus | Amide, not free acid. An acid form is roughly 1 Da heavier |
| Purity | Area percent by reverse-phase HPLC with wavelength and gradient stated. Two aromatic residues give real side-chain absorbance |
| Salt form | Acetate, trifluoroacetate or hydrochloride. The 639.8 figure is the free base |
| Content | Milligrams actually present, reported separately from purity |
Storage and handling in the lab
SS-31 has no methionine and no cysteine, so it is less oxidation-prone than several other catalog materials, and at four residues there is little backbone to hydrolyse. The residue to think about is the dimethyltyrosine phenol, which like any phenol can oxidise given time, warmth and light. Marogen does not publish per-material storage conditions, so confirm the condition for your lot with the wholesale team. The points below are general laboratory practice, not a Marogen specification.
- Keep the solid sealed, dry and cold, and bring the vial to room temperature before opening so moisture does not condense into the powder.
- Keep solutions cold and out of light. The phenolic residue is the part that rewards that care.
- Note the salt form in your own record. On a 640 g/mol molecule, an unrecorded trifluoroacetate changes your effective concentration noticeably.
- Store the metered spray as the supplier states on the quote, upright and away from heat.
Telling it apart from related compounds
SS-31 belongs to a numbered series of Szeto-Schiller peptides, and the numbers are not grades of one compound. SS-02, SS-20 and SS-31 are different sequences with different masses, and only SS-31 has the D-Arg-Dmt-Lys-Phe-NH2 composition. The commercially important substitution to watch for is an all-L analogue or one built with plain tyrosine, both of which are cheaper to make and neither of which is SS-31.
| Material | How it differs and how to check |
|---|---|
| SS-20 and SS-02 | Different sequences in the same series, different masses. Numbered siblings, not grades of SS-31 |
| All-L analogue | Identical mass to SS-31, because enantiomers weigh the same. Only chiral analysis separates them |
| Tyrosine in place of Dmt | Roughly 28 Da lighter. Visible by mass and by a shift in retention |
| Free acid form | C-terminal acid rather than amide, around 1 Da heavier. Easy to miss on a low-resolution instrument |
What the published literature measured
The SS-peptide record is unusually coherent for a research chemical: one group designed the series, published the design, and then published the mechanism work. The three papers below are the design paper, the cardiolipin-binding measurement, and the review that ties the assays together.
Zhao K, Zhao GM, Wu D, et al.. Journal of Biological Chemistry 2004; 279:34682-34690.
Reported the design of the Szeto-Schiller tetrapeptide series, including SS-31, and measured mitochondrial uptake and swelling in isolated mitochondria.
Birk AV, Liu S, Soong Y, et al.. Journal of the American Society of Nephrology 2013; 24:1250-1261.
Measured binding of SS-31 to cardiolipin and the resulting changes in electron-transport activity in isolated mitochondria.
Szeto HH. British Journal of Pharmacology 2014; 171:2029-2050.
Reviewed the cardiolipin-binding mechanism and the bioenergetic assays used across the SS-peptide series.
Wholesale availability
The SS-31 vial and the nasal spray are supplied wholesale, priced per account rather than from a public list. If your method depends on the stereochemistry or on the Dmt residue being genuine, say so in the pricing request so the team can confirm what the lot's documentation actually covers before you order.
Apply for wholesale pricing
List the materials, sizes and units you need, or ask about the range, and say a little about the business. Pricing is set per account and confirmed on every quote, with the lot’s documentation status stated for each line.
Questions
What is SS-31 and what else is it called?
SS-31 is a synthetic tetrapeptide amide, D-Arg-Dmt-Lys-Phe-NH2, CAS 736992-21-5, with a published molecular weight of 639.8 g/mol for the free base. It also appears in the literature and in regulatory filings as elamipretide, MTP-131 and Bendavia. All four names refer to the same molecule, which is worth knowing when searching, because the research record is split across them.
What is Dmt in the SS-31 sequence?
2′,6′-dimethyltyrosine, a non-proteinogenic amino acid: a tyrosine with two methyl groups on the aromatic ring. It is residue two and it is part of the molecule's identity, not a modification. A supplier that substitutes plain tyrosine produces a compound roughly 28 Da lighter with different retention, so this is one substitution a mass spectrum catches easily.
Can mass spectrometry prove a lot is really SS-31?
Only partly. Mass confirms the formula, which catches a tyrosine substitution or a free-acid C-terminus. It cannot confirm the D-arginine, because D and L enantiomers have identical masses, so an all-L analogue returns the same spectrum. Proving the stereochemistry needs chiral analysis or, at minimum, a documented synthetic route stating which amino acid was used. A certificate that claims SS-31 on mass alone is incomplete.
What formats does Marogen stock SS-31 in?
Two. A single-strength lyophilized vial, and a 15 mL metered nasal spray at the lowest spray strength in the range, with the metered output per actuation published as a device specification. There is no SS-31 pen and no blend containing it. The vial is the right format when the method needs a concentration the lab sets rather than one the supplier filled.
Where does Marogen publish SS-31 lot certificates?
In the certificate library at marogenbio.com/coa, filed under the lot number printed on the label, with a lookup at marogenbio.com/lot that reads the number printed on the vial. Coverage is partial across the catalog and each material page states where it stands. No SS-31 lot has a published certificate at present, so request the certificate for your lot with the quote.
Research use only. This guide describes materials supplied for in-vitro research and analytical method development. Nothing here is dosing, administration or use information, and no product on this site is offered for human or animal consumption. See the research use policy.