What BPC-157 is
Published chemistry, not a measurement from any lot.
BPC-157 is a synthetic 15-residue linear peptide, Gly-Glu-Pro-Pro-Pro-Gly-Lys-Pro-Ala-Asp-Asp-Ala-Gly-Leu-Val, with the international nonproprietary name bepecin. The sequence corresponds to a partial sequence of a protein found in gastric juice, referred to in the literature as body protection compound. The parent protein is not characterised in the public databases, so the honest description is a fragment of a gastric-juice protein rather than the name of a specific, sequenced protein.
Five of the fifteen residues are proline, including a run of three in positions three to five. That proline content is what makes the peptide behave the way it does on a column, and it is the practical reason the molecule is comparatively robust: prolines interrupt the backbone geometry many proteases need. Lysine 7 and the two aspartates carry the charge, and there are no cysteines, so there is no disulfide chemistry.
- G1
- E2
- P3
- P4
- P5
- G6
- K7
- P8
- A9
- D10
- D11
- A12
- G13
- L14
- V15
- CAS
- 137525-51-0
- Molecular formula
- C62H98N16O22
- Molecular weight
- 1419.5 g/mol
- Sequence
- GEPPPGKPADDAGLV
- Residues
- 15
- Also searched as
- BPC157, Body Protection Compound, PL 14736
Compiled from public chemistry records (PubChem, FDA GSRS, UniProt). Values marked “awaiting confirmation” are not yet confirmed by Marogen. The certificate for a lot is the authority for every number on it. See the analytical reference table.
Formats Marogen stocks
Every catalog listing that contains BPC-157, with sizes and SKUs.
BPC-157 appears in more catalog listings than any other molecule Marogen stocks. The single-component vial is the starting point for analytical work and comes in two sizes. Beyond that it appears in four vial blends and two nasal sprays, and in two of the six prefilled research pens: the Wolverine pen, which pairs it with the TB-500 fragment, and the KLOW pen, which puts it alongside GHK-Cu, TB-500 and KPV.
Blends change the analytical problem, not just the shopping list. A four-component pen or vial gives one chromatogram with four main peaks, four calculated masses to confirm, and a content figure that has to be reported per component. Marogen does not publish per-component concentrations or fill volumes for the pens, so have those stated on the quote.
| Listing | Form | Sizes | SKU | Documentation |
|---|---|---|---|---|
| BPC-157 | Lyophilized powder, sealed vial | 5 mg10 mg | BPC-5MGBPC-10MG | Lot UNBP5 on file |
| BPC-157/TB-500 Blend | Lyophilized powder, sealed vial | 10/10 mg | BPCTB | Lot BPCTB20-1008 on file |
| Wolverine | Lyophilized powder, sealed vial | 10 mg20 mg | WOLV-10MGWOLV-20MG | Lot UNBT10 on file |
| GLOW 70 mg: GHK-Cu / BPC-157 / TB-500 | Lyophilized powder, sealed vial | 70 mg | GLOW | Lot GLOW70-0803 on file |
| KLOW 80 mg: GHK-Cu / BPC-157 / TB-500 / KPV | Lyophilized powder, sealed vial | 80 mg | KLOW | Lot KLOW80-1008 on file |
| Wolverine BPC-157 + TB-500 Fragment | 15 mL metered nasal spray | 15 mg + 15 mg / 15 mL | SNS-WOLV-30 | Not yet published |
| GLOW BPC-157 + TB-500 Fragment + GHK-Cu | 15 mL metered nasal spray | 15 mg + 15 mg + 75 mg / 15 mL | SNS-GLOW-105 | Not yet published |
| Wolverine | Prefilled research pen | 10+10 mg | PEN-WOLV-20 | Not yet published |
| KLOW | Prefilled research pen | Not published | PEN-KLOW | Not yet published |
9 catalog listings are covered here. Sizes, SKUs and documentation status are read from the catalog at build time. Blends contain more than one molecule, so only single-component listings behave as a single-analyte standard. Pricing is per account: see wholesale pricing.
What a certificate of analysis must show
The minimum a BPC-157 certificate has to carry.
BPC-157 has published lot certificates in the Marogen library, so there is a worked example rather than a hypothetical. Lot UNBP5, a 5 mg vial, was tested by Freedom Diagnostics and reports 99.83 percent purity by HPLC with identity confirmed by mass spectrometry, and a net content of 6.31 mg. That last figure is the useful lesson: content and purity are different measurements, and a high-purity vial can still be filled well above its label.
Marogen publishes released certificates under the lot number printed on the label, in the certificate library at marogenbio.com/coa, with a lookup at marogenbio.com/lot. For a blend, a certificate that reports a single purity figure without naming which component it belongs to is not usable.
| Field | What it has to say for BPC-157 |
|---|---|
| Lot number | As printed on the vial, bottle or pen, matching the label exactly |
| Identity | Observed against calculated mass: near m/z 1420.5 for [M+H]+, 710.8 for [M+2H]2+ and 474.2 for [M+3H]3+, from 1419.5 g/mol |
| Sequence | GEPPPGKPADDAGLV, fifteen residues, stated as the expected sequence |
| Purity | Area percent by reverse-phase HPLC with ultraviolet detection at 214 or 220 nm, with the gradient stated |
| Related substances | Des-amino and oxidised peaks, plus truncations from the proline-rich region. The published UNBP5 chromatogram names both |
| Content | Milligrams actually present, separate from purity. UNBP5 reports 6.31 mg in a 5 mg vial |
| Salt form | Free peptide or acetate. The 1419.5 figure is the free peptide |
| Per component, for blends | Purity, mass and content for each component separately, not one combined number |
Storage and handling in the lab
The peptide's reputation for stability comes from gastric-juice experiments, not from room-temperature storage, and the two are unrelated. As a lyophilized solid it needs the same care as any peptide: dry, cold and sealed. Marogen does not publish per-material storage conditions, so confirm the condition for your lot with the wholesale team and record it in your lot file. The points below are general laboratory practice, not a Marogen specification.
- Keep the solid sealed, dry and cold, and bring the vial to room temperature before opening so moisture does not condense into the powder.
- Make up aqueous stocks in small volumes and keep them cold. The published UNBP5 chromatogram shows a des-amino peak, and hydrolysis in solution is the route that grows it.
- For blends and pens, remember you are storing several molecules under one condition. The least stable component sets the limit.
- Record the lot number against every measurement, and note the net content figure separately from the label strength.
Telling it apart from related compounds
The practical identification problem with BPC-157 is not counterfeits but blends. A bottle labelled Wolverine, GLOW or KLOW contains BPC-157 plus one to three other molecules, and a buyer who treats any of them as a BPC-157 standard is working with a mixture. The other recurring issue is arginate salt forms sold as though they were a different compound.
| Material | How it differs and how to check |
|---|---|
| Wolverine | BPC-157 with the TB-500 fragment. Two main peaks, two calculated masses. Listed as a vial, a spray and a pen |
| GLOW and KLOW | Three and four components respectively, adding GHK-Cu and, in KLOW, KPV. One chromatogram, several masses |
| BPC-157 arginate | A salt form, not a different peptide. Same peptide mass by mass spectrometry, different weighing basis |
| Truncated sequences | Loss of residues around the proline run. Lower mass, separate retention, and the first thing a chromatogram shows |
What the published literature measured
The BPC-157 literature is dominated by one research group and is almost entirely rodent work, which is worth knowing before citing it. The papers below are the primary ones in the sense that they report methods and measurements rather than restating earlier claims.
Sikiric P, Seiwerth S, Rucman R, et al.. Current Pharmaceutical Design 2011; 17:1612-1632.
Collected the animal-model literature on the pentadecapeptide, including the stability observations in gastric juice that the compound is named for.
Chang CH, Tsai WC, Lin MS, et al.. Journal of Applied Physiology 2011; 110:774-780.
Measured outgrowth, survival and migration of cultured rat tendon fibroblasts exposed to BPC-157, an in-vitro assay often reproduced in method work.
Sikiric P, Rucman R, Turkovic B, et al.. Current Pharmaceutical Design 2018; 24:1990-2001.
Reviewed the vascular and cytoprotection experiments reported for the peptide across rodent models, with the methods used in each.
Wholesale availability
All nine BPC-157 listings are supplied wholesale, priced per account rather than from a public list. One pricing request can cover the single-component vial, the blends, the sprays and the pens together, and the quote confirms availability, lead time and which lots have a published certificate.
Apply for wholesale pricing
List the materials, sizes and units you need, or ask about the range, and say a little about the business. Pricing is set per account and confirmed on every quote, with the lot’s documentation status stated for each line.
Questions
What is BPC-157 as a molecule?
A synthetic 15-residue linear peptide, Gly-Glu-Pro-Pro-Pro-Gly-Lys-Pro-Ala-Asp-Asp-Ala-Gly-Leu-Val, CAS 137525-51-0, with a published molecular weight of 1419.5 g/mol for the free peptide. Its international nonproprietary name is bepecin. The sequence matches a partial sequence of a protein found in gastric juice; that parent protein is not characterised in public databases, so it should not be named as though it were.
Which Marogen products contain BPC-157?
Nine listings: the single-component vial in two sizes; four vial blends, being the BPC-157 and TB-500 blend, Wolverine, GLOW and KLOW; two nasal sprays, Wolverine and GLOW; and two prefilled research pens, Wolverine and KLOW. A blend certificate must report every component separately, so only the single-component vial behaves as a single-analyte standard.
Does Marogen publish a BPC-157 certificate of analysis?
Yes. BPC-157 has published lot certificates. Lot UNBP5, a 5 mg vial tested by Freedom Diagnostics, reports 99.83 percent purity by HPLC, identity confirmed by mass spectrometry, and a net content of 6.31 mg. It is published under its lot number at marogenbio.com/coa and findable through the lot lookup at marogenbio.com/lot.
Why is net content different from purity?
They answer different questions. Purity is relative: the share of the detected material that is the target peptide, reported as area percent from a chromatogram. Net content is absolute: how many milligrams of peptide are actually in the vial. A lot can be 99.8 percent pure and still be filled above or below its label strength, which is exactly what lot UNBP5 shows at 6.31 mg in a 5 mg vial.
Can I buy BPC-157 wholesale from Marogen?
Yes, in any of the nine formats, wholesale to businesses and priced per account rather than from a public list. One pricing request can cover vials, blends, sprays and pens in any mix of sizes and units, and the quote confirms pricing, availability, lead time and documentation status per lot.
Research use only. This guide describes materials supplied for in-vitro research and analytical method development. Nothing here is dosing, administration or use information, and no product on this site is offered for human or animal consumption. See the research use policy.