Research use only. Not for human or animal consumption.La Jolla, CaliforniaLot lookupContact
MAROGENBIO

Compound guide

Semax (MEHFPGP)

What Semax is as a molecule, why the common “ACTH(4-10) analogue” description is one residue group off, the four formats Marogen stocks, and what a certificate for a Semax lot has to show.

Catalog formats covered
4
Papers cited
3
Last reviewed
2026-11-12
Classification
Research use only
Buying this material?
Apply for wholesale pricing
01

What Semax is

Published chemistry, not a measurement from any lot.

Semax is a synthetic heptapeptide, Met-Glu-His-Phe-Pro-Gly-Pro, built from a four-residue fragment of adrenocorticotropic hormone with a synthetic Pro-Gly-Pro tail added at the C-terminus. The ACTH-derived part is residues 4 to 7, MEHF, and the PGP tripeptide is not natural to ACTH at all. It was the tail that made the molecule interesting to the chemists who designed it, because tripeptide PGP is comparatively resistant to the aminopeptidases that cleave short peptides.

Nearly every datasheet in the market, and much of the literature, calls Semax an “ACTH(4-10) analogue”. PubChem titles the compound “ACTH (4-7), Pro-Gly-Pro-”, which is the accurate description. The difference is not pedantry: a buyer expecting a 4-10 fragment is expecting three extra residues and a different mass.

  1. M1
  2. E2
  3. H3
  4. F4
  5. P5
  6. G6
  7. P7
N-terminusC-terminus7 residues
CAS
80714-61-0
Molecular formula
C37H51N9O10S
Molecular weight
813.9 g/mol
Sequence
MEHFPGP
Residues
7
Also searched as
ACTH 4-7 Pro-Gly-Pro

Compiled from public chemistry records (PubChem, FDA GSRS, UniProt). Values marked “awaiting confirmation” are not yet confirmed by Marogen. The certificate for a lot is the authority for every number on it. See the analytical reference table.

02

Formats Marogen stocks

Every Semax listing in the catalog, with its sizes and SKUs.

Marogen lists Semax in four places, and only two are the plain parent peptide. The lyophilized vial comes in two sizes and is the format for analytical work, because the solid can be weighed. The 15 mL metered nasal spray is the parent peptide already in solution, with metered output per actuation published as a device specification. There is no Semax pen.

The other two listings are derivatives, and they matter for identity work. The N-acetyl Semax amidate spray is a modified molecule: acetylation at the N-terminus and an amide at the C-terminus both change the formula and the mass, so a certificate for that bottle cannot use the parent's calculated mass. The blend bottle carries N-acetyl derivatives of both Semax and Selank, which means two sets of peaks in one chromatogram.

Catalog formats covered by this guide
ListingFormSizesSKUDocumentation
SemaxLyophilized powder, sealed vial5 mg10 mgSMAX-5MGSMAX-10MGLot SEMX10-0803 on file
Semax Nasal Spray15 mL metered nasal spray30 mg / 15 mLSNS-SEMAX-30Not yet published
N-Acetyl Semax Amidate Nasal Spray15 mL metered nasal spray30 mg / 15 mLSNS-NASEMAX-30Not yet published
N-Acetyl Semax + N-Acetyl Selank Blend15 mL metered nasal spray30 mg + 30 mg / 15 mLSNS-NA-BLEND-60Lot SMSLN10-1015 on file

4 catalog listings are covered here. Sizes, SKUs and documentation status are read from the catalog at build time. Blends contain more than one molecule, so only single-component listings behave as a single-analyte standard. Pricing is per account: see wholesale pricing.

03

What a certificate of analysis must show

The minimum a Semax certificate has to carry.

The single most useful line on a Semax certificate is the observed mass against the calculated mass, because mass is what separates the parent from the acetylated amidate and from any truncated sequence that lost a proline. Acetylation adds roughly 42 Da and amidation subtracts roughly 1 Da, so the derivative sits near 855 g/mol where the parent sits at 813.9. A certificate that reports the parent mass for a derivative bottle, or the other way around, is describing the wrong molecule.

Marogen publishes released certificates under the lot number printed on the label, in the certificate library at marogenbio.com/coa, with a lookup at marogenbio.com/lot. Coverage is partial and each catalog page states it. No Semax lot has a published certificate today, so request the certificate for your lot with the quote.

What a certificate of analysis must show
FieldWhat it has to say for Semax
Lot numberAs printed on the vial or bottle, matching the label exactly
Which moleculeParent Semax or the N-acetyl amidate derivative. They are different compounds with different masses
IdentityObserved against calculated mass: near m/z 814.9 for [M+H]+ or 408.0 for [M+2H]2+, from 813.9 g/mol
SequenceMEHFPGP, seven residues, stated as the expected sequence rather than measured
PurityArea percent by reverse-phase HPLC with ultraviolet detection at 214 or 220 nm, with the gradient stated
Related substancesMethionine-oxidised Semax and truncated sequences missing a terminal proline
Salt formFree peptide, acetate or trifluoroacetate, since the salt changes the weighing basis
ContentMilligrams actually present, reported separately from purity
04

Storage and handling in the lab

The N-terminal methionine is the weak point. Methionine oxidises to the sulfoxide readily, and the oxidised peptide usually elutes just ahead of the main peak, so an oxidising lot shows up as a shoulder before it shows up anywhere else. Marogen does not publish per-material storage conditions, so confirm the condition for your lot with the wholesale team and keep it in your own lot record. The points below are general laboratory practice, not a Marogen specification.

  • Keep the lyophilized solid sealed, dry and cold, and bring the vial to room temperature before opening so moisture does not condense into the powder.
  • Treat the methionine as the thing being protected: minimise headspace air, avoid repeated opening and keep oxidising buffers away from stock solutions.
  • Store the metered spray as the supplier states on the quote, and keep it upright and out of light.
  • Record the lot number with every chromatogram. A rising oxidation shoulder is only interpretable against a known lot.
05

Telling it apart from related compounds

Semax has three near neighbours that get confused with it, and all three are separable by mass. The acetylated amidate derivative is the one most often mislabelled, because vendors list it as plain Semax with an extra word in front. Selank is a different heptapeptide that happens to share the same PGP tail, which makes the two look related on a label and makes them obvious on a chromatogram.

Telling it apart from related compounds
MaterialHow it differs and how to check
N-acetyl Semax amidateAcetyl at the N-terminus and an amide at the C-terminus. Roughly 41 Da heavier, near 855 g/mol. Different retention, different calculated mass
Selank (TKPRPGP)Shares the Pro-Gly-Pro tail but nothing else. 751.9 g/mol, no methionine, so no oxidation shoulder
ACTH(4-10) fragmentThree residues longer than the Semax parent fragment. Different mass, and not what Semax is, despite the common description
Oxidised SemaxOne oxygen heavier, 16 Da up. Usually elutes just before the main peak and is the first sign of a mishandled lot
06

What the published literature measured

The Semax literature is largely Russian, largely rodent, and largely transcript-level. The three papers below are the most reproducible anchors, and all three measured gene or protein expression in animal tissue rather than anything in a human.

  1. Shadrina M, Kolomin T, Agapova T, et al.. Journal of Molecular Neuroscience 2010; 41:30-35.

    Measured NGF and BDNF transcript levels over time in rat hippocampus, frontal cortex and retina after Semax was given to the animals.

  2. Agapova TY, Agniullin YV, Shadrina MI, et al.. Neuroscience Letters 2007; 417:201-205.

    Measured neurotrophin gene expression in rat brain tissue under Semax, described in the paper as an analogue of ACTH(4-10).

  3. Dolotov OV, Karpenko EA, Inozemtseva LS, et al.. Brain Research 2006; 1117:54-60.

    Measured BDNF and trkB expression in rat hippocampus, one of the few Semax papers to report protein as well as transcript levels.

07

Wholesale availability

The Semax vial, the parent spray, the acetylated amidate spray and the Semax with Selank blend are all supplied wholesale, priced per account rather than from a public list. One pricing request can cover any mix of them, and the quote confirms availability, lead time and documentation status for each.

Apply for wholesale pricing

List the materials, sizes and units you need, or ask about the range, and say a little about the business. Pricing is set per account and confirmed on every quote, with the lot’s documentation status stated for each line.

08

Questions

Is Semax an ACTH(4-10) analogue?

Not exactly, and the distinction matters when you are checking a mass. Semax is MEHFPGP: the ACTH-derived part is residues 4 to 7, Met-Glu-His-Phe, and Pro-Gly-Pro is a synthetic tail. PubChem titles the compound “ACTH (4-7), Pro-Gly-Pro-”. The “4-10 analogue” phrasing is common in datasheets and in the literature, but a true 4-10 fragment is three residues longer with a different mass.

What is the difference between Semax and N-acetyl Semax amidate?

They are different compounds. The derivative carries an acetyl group at the N-terminus and an amide at the C-terminus, which together add roughly 41 Da, putting it near 855 g/mol against 813.9 for the parent. It has different retention and a different calculated mass, so a certificate written for one is not valid for the other.

What formats does Marogen stock Semax in?

Four listings: a lyophilized vial in two sizes, a 15 mL metered nasal spray of the parent peptide, a 15 mL metered spray of the N-acetyl amidate derivative, and a blend spray combining N-acetyl derivatives of Semax and Selank. There is no Semax pen.

What should a Semax certificate of analysis show?

Which molecule the lot is, parent or derivative, stated explicitly. Then the lot number, the testing laboratory, the date, identity by observed against calculated mass, purity as area percent by reverse-phase HPLC with the wavelength and gradient given, the salt form, and content in milligrams reported separately from purity. Methionine-oxidised Semax is the related substance worth naming.

Where does Marogen publish Semax lot certificates?

In the certificate library at marogenbio.com/coa, filed under the lot number printed on the label, with a lookup at marogenbio.com/lot. Coverage is partial and stated on every material page. No Semax lot has a published certificate at present, so ask for the certificate for your lot with the quote.

Research use only. This guide describes materials supplied for in-vitro research and analytical method development. Nothing here is dosing, administration or use information, and no product on this site is offered for human or animal consumption. See the research use policy.