What is in each cartridge
Published chemistry for the fills, not a measurement from any lot.
These four span the range of what a prefilled cartridge can hold. The NAD+ pen is a single molecule that is not a peptide at all: nicotinamide adenine dinucleotide, a dinucleotide coenzyme, CAS 53-84-9, 663.4 g/mol. The MOTS-c pen holds one peptide, the 16-residue mitochondrial-derived MRWQEMGYIFYPRKLR at 2174.6 g/mol.
The other two are blends. Wolverine pairs BPC-157, the 15-residue GEPPPGKPADDAGLV at 1419.5 g/mol, with the TB-500 fragment Ac-LKKTETQ at 889. KLOW puts four molecules in one cartridge: GHK-Cu, BPC-157, the TB-500 fragment and KPV. That makes it the most analytically demanding item in the range, because one chromatogram has to resolve a copper complex at 401.9 g/mol, a tripeptide at 342.4, a heptapeptide at 889 and a pentadecapeptide at 1419.5.
The four pens as listed
Read directly from the catalog.
Two of the four publish a content and two do not. The NAD+ pen is listed at 500 mg and the Wolverine pen at 10 mg each of its two components, which Marogen's verification record flags as needing confirmation against a certificate. The MOTS-c and KLOW pens are listed with no strength.
None publishes a concentration, a fill volume or a vehicle, and neither blend publishes a per-component split. Every one also exists as a vial, and MOTS-c as a nasal spray too, so for any method needing a concentration the lab sets, the vial is the format to buy.
| Listing | Form | Sizes | SKU | Documentation |
|---|---|---|---|---|
| KLOW | Prefilled research pen | Not published | PEN-KLOW | Not yet published |
| MOTS-C | Prefilled research pen | Not published | PEN-MOTS | Not yet published |
| NAD+ | Prefilled research pen | 500 mg | PEN-NAD-500 | Not yet published |
| Wolverine | Prefilled research pen | 10+10 mg | PEN-WOLV-20 | Not yet published |
4 catalog listings are covered here. Sizes, SKUs and documentation status are read from the catalog at build time. Blends contain more than one molecule, so only single-component listings behave as a single-analyte standard. Pricing is per account: see wholesale pricing.
Which figures are published and which are not
The gap between a box strength and a specification.
A box strength looks like a specification and is not one. What Marogen publishes is a product name, a SKU, and in two cases a total milligram figure. It does not publish the concentration, the fill volume, the vehicle, or how a blend's total divides between components.
For the blends that gap is larger than it looks. A total without a ratio is close to uninformative: KLOW's four components could be in any proportion and the box would read the same. If the ratio matters, it has to come from the lot's certificate, reported per component.
| Pen | What the catalog publishes |
|---|---|
| NAD+ pen | 500 mg total content. No concentration, fill volume or vehicle |
| MOTS-c pen | No published strength, concentration, fill volume or vehicle |
| Wolverine pen | 10 mg of each per the catalog copy, flagged as needing confirmation |
| KLOW pen | No published strength and no split across its four molecules |
| All four | No vehicle stated, which affects stability and dilution |
Identification and documentation
A blend certificate has to do four jobs, not one.
For the two single-component pens, identification is ordinary: one calculated mass, one observed mass, one purity figure, one content figure. NAD+ is the exception, because it absorbs near 260 nm rather than the 214 or 220 nm used for peptides, so the wavelength has to match the analyte.
For Wolverine and KLOW, a single purity percentage is not a usable measurement. The certificate needs a mass, a purity figure and a content figure per molecule, two sets for Wolverine and four for KLOW. The TB-500 component carries an open question the published Wolverine vial certificate illustrates: lot UNBT10 names Thymosin Beta-4 while the catalog describes the shorter fragment, which Marogen flags rather than resolving by assumption. Certificates are published by lot number at marogenbio.com/coa.
| Field | What to require for these pens |
|---|---|
| Per-component identity | Mass for each: 663.4 NAD+, 2174.6 MOTS-c, 1419.5 BPC-157, 889 TB-500 fragment, 401.9 GHK-Cu, 342.4 KPV |
| Per-component purity | A separate figure for each; a combined percentage says nothing about ratio |
| Per-component content | Milligrams of each, the only way a total means anything |
| Which TB-500 substance | The Ac-LKKTETQ heptapeptide or thymosin beta-4, about 4,000 g/mol apart |
| Detection wavelength | Near 260 nm for NAD+, 214 or 220 nm for peptides |
| Concentration and fill volume | Not published for any pen. Require it against the lot number |
| Fill or release date | A pen is a dated solution, so age is part of the measurement |
Storage and handling in the lab
All four are solutions, and the published formulation literature is consistent that a peptide in solution degrades faster than as a dry solid. Two add a complication. NAD+ is unstable in water and sensitive to pH, the least forgiving fill in the range. KLOW holds a copper complex alongside three peptides, and copper is an oxidation catalyst, so it is the one cartridge where a component works against its neighbours. The points below are general laboratory practice, not a Marogen specification.
- Record the lot number and the release or fill date on receipt. For a solution, age is a variable.
- Hold each pen at the temperature the supplier states, upright and out of light, and do not freeze a filled cartridge unless the supplier says it tolerates it.
- Treat the MOTS-c cartridge as light-sensitive: a tryptophan and two methionines are three degradation handles in one peptide.
- For Wolverine and KLOW the least stable component sets the limit, and in KLOW that is the copper complex.
Telling the four apart and matching them to vials
Each pen has a vial counterpart under the same product name, and the two are not interchangeable even when the name matches: one is a solid you weigh, the other a solution someone else made.
| Pen | Its counterparts and overlaps |
|---|---|
| NAD+ pen | Also a vial in two sizes and a nasal spray. The only non-peptide in the pen range |
| MOTS-c pen | Also a vial in three strengths and a nasal spray |
| Wolverine pen | Also a vial in two sizes and a nasal spray, and the same pair as the BPC-157 and TB-500 blend |
| KLOW pen | Also a vial. Shares three components with GLOW, minus KPV |
What the published literature measured
No published literature covers these blends as blends; the measurements exist for the components. The four below are the primary record for the molecules in these cartridges.
Imai S, Armstrong CM, Kaeberlein M, Guarente L. Nature 2000; 403:795-800.
Measured deacetylase activity of the yeast Sir2 protein in vitro and showed the reaction consumes NAD+ as a cosubstrate, which is why NAD+ concentration is treated as a variable in sirtuin assays.
Lee C, Zeng J, Drew BG, et al.. Cell Metabolism 2015; 21:443-454.
Identified the open reading frame in mitochondrial 12S rRNA that encodes the 16-residue peptide, and reported the first metabolic measurements in cell and mouse models.
Safer D, Elzinga M, Nachmias VT. Journal of Biological Chemistry 1991; 266:4029-4032.
Showed by sequencing and co-chromatography that the actin-sequestering peptide then called Fx is thymosin beta-4, establishing the parent protein's identity.
Pickart L, Thaler MM. Nature New Biology 1973; 243:85-87.
Isolated the glycyl-histidyl-lysine tripeptide from human plasma and reported its effect on cultured liver cells, the paper that put GHK on record.
Wholesale availability
All four pens are supplied wholesale, priced per account rather than from a public list, and one pricing request can cover pens and their vial counterparts. For the two pens listed without a strength, and for both blends, ask for total content, concentration, fill volume and the per-component split against a lot number.
Apply for wholesale pricing
List the materials, sizes and units you need, or ask about the range, and say a little about the business. Pricing is set per account and confirmed on every quote, with the lot’s documentation status stated for each line.
Questions
What is in the KLOW pen?
Four molecules: GHK-Cu at 401.9 g/mol; BPC-157, the 15-residue GEPPPGKPADDAGLV at 1419.5; the TB-500 fragment Ac-LKKTETQ at 889; and KPV, Lys-Pro-Val at 342.4. The catalog publishes no total strength and no per-component split, so both need confirming on the quote.
What is in the Wolverine pen?
Two molecules: BPC-157 and the TB-500 fragment. The catalog copy says 10 mg of each, and Marogen's verification record flags that figure as needing confirmation against a certificate, because no public source can check it. The same pair is also sold as a vial, a nasal spray and the BPC-157 and TB-500 blend vial.
What should a certificate for a blend pen show?
Every component separately. For Wolverine that means two sets of observed and calculated mass, purity and content; for KLOW, four. A single purity percentage says nothing about the ratio, which is usually the figure that matters. It should also state which TB-500 substance is present, the heptapeptide at 889 g/mol or full-length thymosin beta-4 at roughly 4,963.
Why does NAD+ need a different detection wavelength?
Because it is not a peptide. Peptide purity is read by ultraviolet absorbance at 214 or 220 nm, where the backbone absorbs. NAD+ absorbs near 260 nm from its nucleotide bases, so a purity figure measured at 214 nm is the wrong channel.
Research use only. This guide describes materials supplied for in-vitro research and analytical method development. Nothing here is dosing, administration or use information, and no product on this site is offered for human or animal consumption. See the research use policy.