Research use only. Not for human or animal consumption.La Jolla, CaliforniaLot lookupContact
MAROGENBIO

Compound guide

KPV (Lys-Pro-Val)

KPV is three residues, and the figures circulating for it are frequently wrong. The correct formula and mass, the free acid against the amide, the four formats Marogen stocks, and what a certificate must settle.

Catalog formats covered
4
Papers cited
3
Last reviewed
2026-11-12
Classification
Research use only
Buying this material?
Apply for wholesale pricing
01

What KPV is

Published chemistry, not a measurement from any lot.

KPV is a synthetic tripeptide, Lys-Pro-Val, corresponding to residues 11 to 13 of alpha-melanocyte-stimulating hormone. PubChem carries it under the synonym MSH (11-13), and it is the C-terminal end of that hormone rather than a designed sequence. Three standard L-amino acids, one of them basic, one of them proline, and nothing exotic.

The numbers quoted for KPV in the market are often wrong, and Marogen's reference data records the correction. The free acid is C16H30N4O4 at 342.4 g/mol per PubChem. The figures C16H31N5O4 and 357.5 appear on many datasheets, including Marogen's original source file, and 357.5 matches neither the free acid at 342.4 nor the amide KPV-NH2 at about 341.4. Its origin is unknown. The site has corrected both fields and marks the entry as awaiting confirmation.

CAS
67727-97-3 · awaiting confirmation
Molecular formula
C16H30N4O4
Molecular weight
342.4 g/mol
Sequence
KPV
Residues
3
Also searched as
alpha-MSH 11-13

Compiled from public chemistry records (PubChem, FDA GSRS, UniProt). Values marked “awaiting confirmation” are not yet confirmed by Marogen. The certificate for a lot is the authority for every number on it. See the analytical reference table.

02

Formats Marogen stocks

Every catalog listing that contains KPV, with sizes and SKUs.

Marogen lists KPV in four places. The single-component lyophilized vial is one strength and is the only listing where the tripeptide stands alone, which makes it the format for analytical work. The 15 mL metered nasal spray is the same peptide in solution, with metered output per actuation published as a device specification.

The other two listings are the KLOW blend, which pairs KPV with GHK-Cu, BPC-157 and the TB-500 fragment, in a vial and in a prefilled research pen. KLOW is the only blend in the catalog that contains KPV, and the pen is the only pen that does. Per-component amounts and fill volume for the pen are not published, so ask for them on the quote.

Catalog formats covered by this guide
ListingFormSizesSKUDocumentation
KPVLyophilized powder, sealed vial10 mgKPVLot KPV10-0318 on file
KLOW 80 mg: GHK-Cu / BPC-157 / TB-500 / KPVLyophilized powder, sealed vial80 mgKLOWLot KLOW80-1008 on file
KPV Nasal Spray15 mL metered nasal spray30 mg / 15 mLSNS-KPV-30Not yet published
KLOWPrefilled research penNot publishedPEN-KLOWNot yet published

4 catalog listings are covered here. Sizes, SKUs and documentation status are read from the catalog at build time. Blends contain more than one molecule, so only single-component listings behave as a single-analyte standard. Pricing is per account: see wholesale pricing.

03

What a certificate of analysis must show

The acid against the amide is the question to settle.

A KPV certificate has one job above all others: state whether the lot is the free acid or the C-terminal amide. The two differ by roughly 1 Da, 342.4 against about 341.4, which is a small enough gap that a low-resolution instrument reporting a rounded figure cannot settle it. Since the market quotes a mass that matches neither, a certificate that simply repeats 357.5 should be treated as unchecked.

The second thing to look for is whether purity was measured in a way that means anything. KPV is small and has no aromatic residue, so ultraviolet absorbance comes from the backbone alone and the peptide retains poorly on reverse phase. As with Epithalon, the method statement carries the weight. Marogen publishes released certificates by lot number at marogenbio.com/coa, with a lookup at marogenbio.com/lot. No KPV lot has a published certificate today, so request one with the quote.

What a certificate of analysis must show
FieldWhat it has to say for KPV
Lot numberAs printed on the vial, bottle or pen, matching the label exactly
Acid or amideFree acid or KPV-NH2. Roughly 1 Da apart, so a rounded mass does not decide it
IdentityObserved against calculated mass: near m/z 343.4 for [M+H]+ of the free acid at 342.4 g/mol
FormulaC16H30N4O4 for the free acid. Datasheets quoting C16H31N5O4 are wrong for Lys-Pro-Val
SequenceKPV, three residues, stated as the expected sequence
Method detailColumn, gradient and wavelength, since a small peptide with no aromatic residue retains poorly and absorbs weakly
Salt formFree peptide, acetate or trifluoroacetate. On a 342 g/mol molecule a counter-ion is a large share of the weight
ContentMilligrams actually present, reported separately from purity
04

Storage and handling in the lab

A three-residue peptide with no methionine, no cysteine and no aromatic residue is about as robust as peptides get: almost nothing to oxidise and very little backbone to hydrolyse. The practical risks are moisture uptake by the solid and losing track of the salt form, which on a molecule this small changes the effective concentration more than most people expect. Marogen does not publish per-material storage conditions. The points below are general laboratory practice, not a Marogen specification.

  • Keep the solid sealed, dry and cold, and bring the vial to room temperature before opening so moisture does not condense into the powder.
  • Record the salt form alongside the lot number. At 342 g/mol a trifluoroacetate counter-ion is a significant fraction of what you weighed.
  • Keep aqueous stocks cold and in small volumes. Hydrolysis is slow here, but there is no reason to test it.
  • In the KLOW blend and pen, the copper complex and the longer peptides are the limiting components, not the KPV.
05

Telling it apart from related compounds

KPV sits in the melanocortin fragment family, and the fragments are easy to mix up on a label because they are all named by residue number. The one genuinely difficult separation is the free acid from the amide, since mass alone at low resolution will not do it. The one genuinely easy separation is from the longer alpha-MSH fragments, which are far heavier.

Telling it apart from related compounds
MaterialHow it differs and how to check
KPV-NH2, the amideC-terminal amide rather than free acid, around 341.4 against 342.4. Roughly 1 Da, so it needs resolution or a stated synthesis
Alpha-MSH, full lengthThirteen residues, roughly 1665 g/mol. Trivially separable by mass, but shares the MSH naming
Other MSH fragmentsKPV is residues 11 to 13. Fragments such as 6-9 or 11-13 amide are separate compounds with separate masses
KLOW blendFour components in one listing. The certificate has to report KPV separately from the other three
06

What the published literature measured

The KPV record is mostly intestinal cell-culture and mouse work from the mid-2000s. The three papers below are the transport measurement, the murine model work, and the review that places the tripeptide in the melanocortin series.

  1. Dalmasso G, Charrier-Hisamuddin L, Nguyen HT, et al.. Gastroenterology 2008; 134:166-178.

    Measured PepT1-mediated uptake of the tripeptide in intestinal epithelial cell lines and inflammation markers in mouse colitis models.

  2. Kannengiesser K, Maaser C, Heidemann J, et al.. Inflammatory Bowel Diseases 2008; 14:324-331.

    Measured cytokine output and tissue scores in two murine colitis models exposed to the melanocortin-derived tripeptide.

  3. Luger TA, Brzoska T. Annals of the Rheumatic Diseases 2007; 66(Suppl 3):iii52-iii55.

    Reviewed the alpha-MSH fragment literature and placed the C-terminal tripeptide in the melanocortin series.

07

Wholesale availability

The KPV vial, the nasal spray, the KLOW vial and the KLOW pen are all supplied wholesale, priced per account rather than from a public list. Because the published figures for this tripeptide are unreliable, ask in the pricing request what the lot's certificate states for formula, mass and whether the material is the acid or the amide.

Apply for wholesale pricing

List the materials, sizes and units you need, or ask about the range, and say a little about the business. Pricing is set per account and confirmed on every quote, with the lot’s documentation status stated for each line.

08

Questions

What is the correct molecular weight of KPV?

342.4 g/mol for the free acid Lys-Pro-Val, formula C16H30N4O4, per PubChem. The figures 357.5 and C16H31N5O4 circulate widely on vendor datasheets and are wrong for this tripeptide: 357.5 matches neither the free acid at 342.4 nor the C-terminal amide at about 341.4, and its origin is not traceable to any authoritative source. Marogen has corrected both fields in its reference data and marks the entry as awaiting confirmation.

What is KPV derived from?

It is the C-terminal tripeptide of alpha-melanocyte-stimulating hormone, residues 11 to 13, which is why PubChem lists it under the synonym MSH (11-13). It is a natural fragment rather than a designed sequence: lysine, proline and valine, CAS 67727-97-3. The full hormone is thirteen residues and roughly 1665 g/mol.

Which Marogen products contain KPV?

Four listings: the single-component vial, a 15 mL metered nasal spray, the KLOW vial blend with GHK-Cu, BPC-157 and the TB-500 fragment, and the KLOW pen. KLOW is the only blend containing KPV. Only the single-component vial behaves as a single-analyte standard.

Is the free acid or the amide supplied?

That is the question a lot certificate has to answer, and it is the most important field on the page for this material. The free acid is C16H30N4O4 at 342.4 g/mol; the C-terminal amide KPV-NH2 is about 341.4. One dalton apart is close enough that a rounded figure from a low-resolution instrument cannot decide it, so look for either high-resolution mass data or a stated synthetic route.

Where does Marogen publish KPV lot certificates?

In the certificate library at marogenbio.com/coa, filed under the lot number printed on the label, with a lookup at marogenbio.com/lot. Coverage is partial and stated on every material page. No KPV lot has a published certificate at present, so request the certificate for your lot with the quote, and ask whether it states the acid or the amide.

Research use only. This guide describes materials supplied for in-vitro research and analytical method development. Nothing here is dosing, administration or use information, and no product on this site is offered for human or animal consumption. See the research use policy.